49 lines
1.2 KiB
Org Mode
49 lines
1.2 KiB
Org Mode
* Arduino Course
|
|
|
|
Code from Universidad de Granada's Arduino Course.
|
|
|
|
** Usage
|
|
|
|
If you want to use arduino-cli instead of the official Arduino IDE, you can use compile.sh to compile and upload the Sketch to the board.
|
|
|
|
For example:
|
|
|
|
#+BEGIN_SRC sh
|
|
arduino-cli sketch new Test
|
|
./compile.sh Test
|
|
#+END_SRC
|
|
|
|
If you want to see the output of the Serial port, you have to identify the device:
|
|
|
|
#+BEGIN_SRC sh
|
|
arduino-cli board list
|
|
#+END_SRC
|
|
|
|
Then you can see the output of the device, let's assume that the device is /dev/ttyACM0:
|
|
|
|
#+BEGIN_SRC sh
|
|
cat /dev/ttyACM0
|
|
#+END_SRC
|
|
|
|
If you get a /Permission denied/, you have to add your user to the group of the serial port (in this case /dev/ttyACM0).
|
|
|
|
To check the group of the device:
|
|
|
|
#+BEGIN_SRC sh
|
|
ls -la /dev/ttyACM0
|
|
#+END_SRC
|
|
|
|
Then add your user to the group (in this case the group is dialout and the user is user)
|
|
|
|
#+BEGIN_SRC sh
|
|
sudo usermod -aG dialout user
|
|
#+END_SRC
|
|
|
|
*** NodeMCU
|
|
|
|
During the *Week 4*, we used the NodeMCU instead of the Arduino Uno, in this case to compile and upload the sketch (in this case we'll use the sketch Test):
|
|
|
|
#+BEGIN_SRC sh
|
|
./compile_mcu.sh Test
|
|
#+END_SRC
|