606 lines
27 KiB
Plaintext
606 lines
27 KiB
Plaintext
;; -*- mode: emacs-lisp; lexical-binding: t -*-
|
|
;; This file is loaded by Spacemacs at startup.
|
|
;; It must be stored in your home directory.
|
|
|
|
(defun dotspacemacs/layers ()
|
|
"Layer configuration:
|
|
This function should only modify configuration layer settings."
|
|
(setq-default
|
|
;; Base distribution to use. This is a layer contained in the directory
|
|
;; `+distribution'. For now available distributions are `spacemacs-base'
|
|
;; or `spacemacs'. (default 'spacemacs)
|
|
dotspacemacs-distribution 'spacemacs-base
|
|
|
|
;; Lazy installation of layers (i.e. layers are installed only when a file
|
|
;; with a supported type is opened). Possible values are `all', `unused'
|
|
;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
|
|
;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
|
|
;; lazy install any layer that support lazy installation even the layers
|
|
;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
|
|
;; installation feature and you have to explicitly list a layer in the
|
|
;; variable `dotspacemacs-configuration-layers' to install it.
|
|
;; (default 'unused)
|
|
dotspacemacs-enable-lazy-installation 'unused
|
|
|
|
;; If non-nil then Spacemacs will ask for confirmation before installing
|
|
;; a layer lazily. (default t)
|
|
dotspacemacs-ask-for-lazy-installation t
|
|
|
|
;; If non-nil layers with lazy install support are lazy installed.
|
|
;; List of additional paths where to look for configuration layers.
|
|
;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
|
|
dotspacemacs-configuration-layer-path '()
|
|
|
|
;; List of configuration layers to load.
|
|
dotspacemacs-configuration-layers '(
|
|
|
|
;; ----------------------------------------------------------------
|
|
;; Example of useful layers you may want to use right away.
|
|
;; Uncomment some layer names and press `SPC f e R' (Vim style) or
|
|
;; `M-m f e R' (Emacs style) to install them.
|
|
;; ----------------------------------------------------------------
|
|
ivy
|
|
(auto-completion :variables
|
|
auto-completion-return-key-behavior 'complete
|
|
auto-completion-tab-key-behavior 'cycle)
|
|
;; better-defaults
|
|
emacs-lisp
|
|
git
|
|
markdown
|
|
html
|
|
;; org
|
|
(shell :variables
|
|
shell-default-height 30
|
|
shell-default-position 'bottom
|
|
shell-default-shell 'eshell)
|
|
;; spell-checking
|
|
syntax-checking
|
|
(version-control :variables
|
|
version-control-diff-tool 'diff-hl
|
|
version-control-diff-side 'left
|
|
version-control-global-margin t)
|
|
(cmake :variables
|
|
cmake-enable-cmake-ide-support t
|
|
cmake-compile-command "cmake -H. -BDebug -DCMAKE_BUILD_TYPE=Debug -DCMAKE_EXPORT_COMPILE_COMMANDS=YES; ln -s Debug/compile_commands.json .; cmake .")
|
|
(c-c++ :variables
|
|
c-c++-default-mode-for-headers 'c++-mode
|
|
c-c++-backend 'lsp-ccls)
|
|
(java :variables
|
|
java-backend 'lsp)
|
|
shell-scripts
|
|
spacemacs-layouts
|
|
lsp
|
|
dap
|
|
spacemacs-project
|
|
(python :variables
|
|
python-backend 'anaconda
|
|
python-test-runner 'pytest
|
|
python-enable-yapf-format-on-save t)
|
|
yaml
|
|
latex
|
|
pandoc
|
|
)
|
|
|
|
;; List of additional packages that will be installed without being
|
|
;; wrapped in a layer. If you need some configuration for these
|
|
;; packages, then consider creating a layer. You can also put the
|
|
;; configuration in `dotspacemacs/user-config'.
|
|
;; To use a local version of a package, use the `:location' property:
|
|
;; '(your-package :location "~/path/to/your-package/")
|
|
;; Also include the dependencies as they will not be resolved automatically.
|
|
dotspacemacs-additional-packages '(
|
|
doom-themes
|
|
all-the-icons
|
|
doom-modeline
|
|
smartparens
|
|
)
|
|
|
|
;; A list of packages that cannot be updated.
|
|
dotspacemacs-frozen-packages '()
|
|
|
|
;; A list of packages that will not be installed and loaded.
|
|
dotspacemacs-excluded-packages '(
|
|
treemacs
|
|
lsp-treemacs
|
|
rtags
|
|
)
|
|
|
|
;; Defines the behaviour of Spacemacs when installing packages.
|
|
;; Possible values are `used-only', `used-but-keep-unused' and `all'.
|
|
;; `used-only' installs only explicitly used packages and deletes any unused
|
|
;; packages as well as their unused dependencies. `used-but-keep-unused'
|
|
;; installs only the used packages but won't delete unused ones. `all'
|
|
;; installs *all* packages supported by Spacemacs and never uninstalls them.
|
|
;; (default is `used-only')
|
|
dotspacemacs-install-packages 'used-only))
|
|
|
|
(defun dotspacemacs/init ()
|
|
"Initialization:
|
|
This function is called at the very beginning of Spacemacs startup,
|
|
before layer configuration.
|
|
It should only modify the values of Spacemacs settings."
|
|
;; This setq-default sexp is an exhaustive list of all the supported
|
|
;; spacemacs settings.
|
|
(setq-default
|
|
;; If non-nil then enable support for the portable dumper. You'll need
|
|
;; to compile Emacs 27 from source following the instructions in file
|
|
;; EXPERIMENTAL.org at to root of the git repository.
|
|
;; (default nil)
|
|
dotspacemacs-enable-emacs-pdumper nil
|
|
|
|
;; File path pointing to emacs 27.1 executable compiled with support
|
|
;; for the portable dumper (this is currently the branch pdumper).
|
|
;; (default "emacs-27.0.50")
|
|
dotspacemacs-emacs-pdumper-executable-file "emacs-27.0.50"
|
|
|
|
;; Name of the Spacemacs dump file. This is the file will be created by the
|
|
;; portable dumper in the cache directory under dumps sub-directory.
|
|
;; To load it when starting Emacs add the parameter `--dump-file'
|
|
;; when invoking Emacs 27.1 executable on the command line, for instance:
|
|
;; ./emacs --dump-file=~/.emacs.d/.cache/dumps/spacemacs.pdmp
|
|
;; (default spacemacs.pdmp)
|
|
dotspacemacs-emacs-dumper-dump-file "spacemacs.pdmp"
|
|
|
|
;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
|
|
;; possible. Set it to nil if you have no way to use HTTPS in your
|
|
;; environment, otherwise it is strongly recommended to let it set to t.
|
|
;; This variable has no effect if Emacs is launched with the parameter
|
|
;; `--insecure' which forces the value of this variable to nil.
|
|
;; (default t)
|
|
dotspacemacs-elpa-https t
|
|
|
|
;; Maximum allowed time in seconds to contact an ELPA repository.
|
|
;; (default 5)
|
|
dotspacemacs-elpa-timeout 5
|
|
|
|
;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
|
|
;; This is an advanced option and should not be changed unless you suspect
|
|
;; performance issues due to garbage collection operations.
|
|
;; (default '(100000000 0.1))
|
|
dotspacemacs-gc-cons '(100000000 0.1)
|
|
|
|
;; If non-nil then Spacelpa repository is the primary source to install
|
|
;; a locked version of packages. If nil then Spacemacs will install the
|
|
;; latest version of packages from MELPA. (default nil)
|
|
dotspacemacs-use-spacelpa nil
|
|
|
|
;; If non-nil then verify the signature for downloaded Spacelpa archives.
|
|
;; (default nil)
|
|
dotspacemacs-verify-spacelpa-archives nil
|
|
|
|
;; If non-nil then spacemacs will check for updates at startup
|
|
;; when the current branch is not `develop'. Note that checking for
|
|
;; new versions works via git commands, thus it calls GitHub services
|
|
;; whenever you start Emacs. (default nil)
|
|
dotspacemacs-check-for-update nil
|
|
|
|
;; If non-nil, a form that evaluates to a package directory. For example, to
|
|
;; use different package directories for different Emacs versions, set this
|
|
;; to `emacs-version'. (default 'emacs-version)
|
|
dotspacemacs-elpa-subdirectory 'emacs-version
|
|
|
|
;; One of `vim', `emacs' or `hybrid'.
|
|
;; `hybrid' is like `vim' except that `insert state' is replaced by the
|
|
;; `hybrid state' with `emacs' key bindings. The value can also be a list
|
|
;; with `:variables' keyword (similar to layers). Check the editing styles
|
|
;; section of the documentation for details on available variables.
|
|
;; (default 'vim)
|
|
dotspacemacs-editing-style 'vim
|
|
|
|
;; If non-nil output loading progress in `*Messages*' buffer. (default nil)
|
|
dotspacemacs-verbose-loading nil
|
|
|
|
;; Specify the startup banner. Default value is `official', it displays
|
|
;; the official spacemacs logo. An integer value is the index of text
|
|
;; banner, `random' chooses a random text banner in `core/banners'
|
|
;; directory. A string value must be a path to an image format supported
|
|
;; by your Emacs build.
|
|
;; If the value is nil then no banner is displayed. (default 'official)
|
|
dotspacemacs-startup-banner 'official
|
|
|
|
;; List of items to show in startup buffer or an association list of
|
|
;; the form `(list-type . list-size)`. If nil then it is disabled.
|
|
;; Possible values for list-type are:
|
|
;; `recents' `bookmarks' `projects' `agenda' `todos'.
|
|
;; List sizes may be nil, in which case
|
|
;; `spacemacs-buffer-startup-lists-length' takes effect.
|
|
dotspacemacs-startup-lists '((recents . 5)
|
|
(projects . 7))
|
|
|
|
;; True if the home buffer should respond to resize events. (default t)
|
|
dotspacemacs-startup-buffer-responsive t
|
|
|
|
;; Default major mode of the scratch buffer (default `text-mode')
|
|
dotspacemacs-scratch-mode 'text-mode
|
|
|
|
;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
|
|
;; (default nil)
|
|
dotspacemacs-initial-scratch-message nil
|
|
|
|
;; List of themes, the first of the list is loaded when spacemacs starts.
|
|
;; Press `SPC T n' to cycle to the next theme in the list (works great
|
|
;; with 2 themes variants, one dark and one light)
|
|
dotspacemacs-themes '(doom-one
|
|
doom-solarized-light)
|
|
|
|
;; Set the theme for the Spaceline. Supported themes are `spacemacs',
|
|
;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
|
|
;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
|
|
;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
|
|
;; refer to the DOCUMENTATION.org for more info on how to create your own
|
|
;; spaceline theme. Value can be a symbol or list with additional properties.
|
|
;; (default '(spacemacs :separator wave :separator-scale 1.5))
|
|
dotspacemacs-mode-line-theme '(doom)
|
|
|
|
;; If non-nil the cursor color matches the state color in GUI Emacs.
|
|
;; (default t)
|
|
dotspacemacs-colorize-cursor-according-to-state t
|
|
|
|
;; Default font, or prioritized list of fonts. `powerline-scale' allows to
|
|
;; quickly tweak the mode-line size to make separators look not too crappy.
|
|
dotspacemacs-default-font '("Iosevka Slab"
|
|
:size 14
|
|
:weight normal
|
|
:width normal)
|
|
|
|
;; The leader key (default "SPC")
|
|
dotspacemacs-leader-key "SPC"
|
|
|
|
;; The key used for Emacs commands `M-x' (after pressing on the leader key).
|
|
;; (default "SPC")
|
|
dotspacemacs-emacs-command-key "SPC"
|
|
|
|
;; The key used for Vim Ex commands (default ":")
|
|
dotspacemacs-ex-command-key ":"
|
|
|
|
;; The leader key accessible in `emacs state' and `insert state'
|
|
;; (default "M-m")
|
|
dotspacemacs-emacs-leader-key "M-m"
|
|
|
|
;; Major mode leader key is a shortcut key which is the equivalent of
|
|
;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
|
|
dotspacemacs-major-mode-leader-key ","
|
|
|
|
;; Major mode leader key accessible in `emacs state' and `insert state'.
|
|
;; (default "C-M-m")
|
|
dotspacemacs-major-mode-emacs-leader-key "C-M-m"
|
|
|
|
;; These variables control whether separate commands are bound in the GUI to
|
|
;; the key pairs `C-i', `TAB' and `C-m', `RET'.
|
|
;; Setting it to a non-nil value, allows for separate commands under `C-i'
|
|
;; and TAB or `C-m' and `RET'.
|
|
;; In the terminal, these pairs are generally indistinguishable, so this only
|
|
;; works in the GUI. (default nil)
|
|
dotspacemacs-distinguish-gui-tab nil
|
|
|
|
;; Name of the default layout (default "Default")
|
|
dotspacemacs-default-layout-name "Misc"
|
|
|
|
;; If non-nil the default layout name is displayed in the mode-line.
|
|
;; (default nil)
|
|
dotspacemacs-display-default-layout nil
|
|
|
|
;; If non-nil then the last auto saved layouts are resumed automatically upon
|
|
;; start. (default nil)
|
|
dotspacemacs-auto-resume-layouts nil
|
|
|
|
;; If non-nil, auto-generate layout name when creating new layouts. Only has
|
|
;; effect when using the "jump to layout by number" commands. (default nil)
|
|
dotspacemacs-auto-generate-layout-names nil
|
|
|
|
;; Size (in MB) above which spacemacs will prompt to open the large file
|
|
;; literally to avoid performance issues. Opening a file literally means that
|
|
;; no major mode or minor modes are active. (default is 1)
|
|
dotspacemacs-large-file-size 1
|
|
|
|
;; Location where to auto-save files. Possible values are `original' to
|
|
;; auto-save the file in-place, `cache' to auto-save the file to another
|
|
;; file stored in the cache directory and `nil' to disable auto-saving.
|
|
;; (default 'cache)
|
|
dotspacemacs-auto-save-file-location nil
|
|
|
|
;; Maximum number of rollback slots to keep in the cache. (default 5)
|
|
dotspacemacs-max-rollback-slots 5
|
|
|
|
;; If non-nil, the paste transient-state is enabled. While enabled, after you
|
|
;; paste something, pressing `C-j' and `C-k' several times cycles through the
|
|
;; elements in the `kill-ring'. (default nil)
|
|
dotspacemacs-enable-paste-transient-state nil
|
|
|
|
;; Which-key delay in seconds. The which-key buffer is the popup listing
|
|
;; the commands bound to the current keystroke sequence. (default 0.4)
|
|
dotspacemacs-which-key-delay 0.4
|
|
|
|
;; Which-key frame position. Possible values are `right', `bottom' and
|
|
;; `right-then-bottom'. right-then-bottom tries to display the frame to the
|
|
;; right; if there is insufficient space it displays it at the bottom.
|
|
;; (default 'bottom)
|
|
dotspacemacs-which-key-position 'bottom
|
|
|
|
;; Control where `switch-to-buffer' displays the buffer. If nil,
|
|
;; `switch-to-buffer' displays the buffer in the current window even if
|
|
;; another same-purpose window is available. If non-nil, `switch-to-buffer'
|
|
;; displays the buffer in a same-purpose window even if the buffer can be
|
|
;; displayed in the current window. (default nil)
|
|
dotspacemacs-switch-to-buffer-prefers-purpose nil
|
|
|
|
;; If non-nil a progress bar is displayed when spacemacs is loading. This
|
|
;; may increase the boot time on some systems and emacs builds, set it to
|
|
;; nil to boost the loading time. (default t)
|
|
dotspacemacs-loading-progress-bar t
|
|
|
|
;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
|
|
;; (Emacs 24.4+ only)
|
|
dotspacemacs-fullscreen-at-startup nil
|
|
|
|
;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
|
|
;; Use to disable fullscreen animations in OSX. (default nil)
|
|
dotspacemacs-fullscreen-use-non-native nil
|
|
|
|
;; If non-nil the frame is maximized when Emacs starts up.
|
|
;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
|
|
;; (default nil) (Emacs 24.4+ only)
|
|
dotspacemacs-maximized-at-startup t
|
|
|
|
;; A value from the range (0..100), in increasing opacity, which describes
|
|
;; the transparency level of a frame when it's active or selected.
|
|
;; Transparency can be toggled through `toggle-transparency'. (default 90)
|
|
dotspacemacs-active-transparency 90
|
|
|
|
;; A value from the range (0..100), in increasing opacity, which describes
|
|
;; the transparency level of a frame when it's inactive or deselected.
|
|
;; Transparency can be toggled through `toggle-transparency'. (default 90)
|
|
dotspacemacs-inactive-transparency 90
|
|
|
|
;; If non-nil show the titles of transient states. (default t)
|
|
dotspacemacs-show-transient-state-title t
|
|
|
|
;; If non-nil show the color guide hint for transient state keys. (default t)
|
|
dotspacemacs-show-transient-state-color-guide t
|
|
|
|
;; If non-nil unicode symbols are displayed in the mode line.
|
|
;; If you use Emacs as a daemon and wants unicode characters only in GUI set
|
|
;; the value to quoted `display-graphic-p'. (default t)
|
|
dotspacemacs-mode-line-unicode-symbols t
|
|
|
|
;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
|
|
;; scrolling overrides the default behavior of Emacs which recenters point
|
|
;; when it reaches the top or bottom of the screen. (default t)
|
|
dotspacemacs-smooth-scrolling t
|
|
|
|
;; Control line numbers activation.
|
|
;; If set to `t' or `relative' line numbers are turned on in all `prog-mode' and
|
|
;; `text-mode' derivatives. If set to `relative', line numbers are relative.
|
|
;; This variable can also be set to a property list for finer control:
|
|
;; '(:relative nil
|
|
;; :disabled-for-modes dired-mode
|
|
;; doc-view-mode
|
|
;; markdown-mode
|
|
;; org-mode
|
|
;; pdf-view-mode
|
|
;; text-mode
|
|
;; :size-limit-kb 1000)
|
|
;; (default nil)
|
|
dotspacemacs-line-numbers 't
|
|
|
|
;; Code folding method. Possible values are `evil' and `origami'.
|
|
;; (default 'evil)
|
|
dotspacemacs-folding-method 'evil
|
|
|
|
;; If non-nil `smartparens-strict-mode' will be enabled in programming modes.
|
|
;; (default nil)
|
|
dotspacemacs-smartparens-strict-mode nil
|
|
|
|
;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
|
|
;; over any automatically added closing parenthesis, bracket, quote, etc…
|
|
;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
|
|
dotspacemacs-smart-closing-parenthesis nil
|
|
|
|
;; Select a scope to highlight delimiters. Possible values are `any',
|
|
;; `current', `all' or `nil'. Default is `all' (highlight any scope and
|
|
;; emphasis the current one). (default 'all)
|
|
dotspacemacs-highlight-delimiters 'all
|
|
|
|
;; If non-nil, start an Emacs server if one is not already running.
|
|
;; (default nil)
|
|
dotspacemacs-enable-server nil
|
|
|
|
;; Set the emacs server socket location.
|
|
;; If nil, uses whatever the Emacs default is, otherwise a directory path
|
|
;; like \"~/.emacs.d/server\". It has no effect if
|
|
;; `dotspacemacs-enable-server' is nil.
|
|
;; (default nil)
|
|
dotspacemacs-server-socket-dir nil
|
|
|
|
;; If non-nil, advise quit functions to keep server open when quitting.
|
|
;; (default nil)
|
|
dotspacemacs-persistent-server nil
|
|
|
|
;; List of search tool executable names. Spacemacs uses the first installed
|
|
;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
|
|
;; (default '("rg" "ag" "pt" "ack" "grep"))
|
|
dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
|
|
|
|
;; Format specification for setting the frame title.
|
|
;; %a - the `abbreviated-file-name', or `buffer-name'
|
|
;; %t - `projectile-project-name'
|
|
;; %I - `invocation-name'
|
|
;; %S - `system-name'
|
|
;; %U - contents of $USER
|
|
;; %b - buffer name
|
|
;; %f - visited file name
|
|
;; %F - frame name
|
|
;; %s - process status
|
|
;; %p - percent of buffer above top of window, or Top, Bot or All
|
|
;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
|
|
;; %m - mode name
|
|
;; %n - Narrow if appropriate
|
|
;; %z - mnemonics of buffer, terminal, and keyboard coding systems
|
|
;; %Z - like %z, but including the end-of-line format
|
|
;; (default "%I@%S")
|
|
dotspacemacs-frame-title-format "%I@%S"
|
|
|
|
;; Format specification for setting the icon title format
|
|
;; (default nil - same as frame-title-format)
|
|
dotspacemacs-icon-title-format nil
|
|
|
|
;; Delete whitespace while saving buffer. Possible values are `all'
|
|
;; to aggressively delete empty line and long sequences of whitespace,
|
|
;; `trailing' to delete only the whitespace at end of lines, `changed' to
|
|
;; delete only whitespace for changed lines or `nil' to disable cleanup.
|
|
;; (default nil)
|
|
dotspacemacs-whitespace-cleanup nil
|
|
|
|
;; Either nil or a number of seconds. If non-nil zone out after the specified
|
|
;; number of seconds. (default nil)
|
|
dotspacemacs-zone-out-when-idle nil
|
|
|
|
;; Run `spacemacs/prettify-org-buffer' when
|
|
;; visiting README.org files of Spacemacs.
|
|
;; (default nil)
|
|
dotspacemacs-pretty-docs nil))
|
|
|
|
(defun dotspacemacs/user-env ()
|
|
"Environment variables setup.
|
|
This function defines the environment variables for your Emacs session. By
|
|
default it calls `spacemacs/load-spacemacs-env' which loads the environment
|
|
variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'.
|
|
See the header of this file for more information."
|
|
(spacemacs/load-spacemacs-env))
|
|
|
|
(defun dotspacemacs/user-init ()
|
|
"Initialization for user code:
|
|
This function is called immediately after `dotspacemacs/init', before layer
|
|
configuration.
|
|
It is mostly for variables that should be set before packages are loaded.
|
|
If you are unsure, try setting them in `dotspacemacs/user-config' first."
|
|
(setq-default git-magit-status-fullscreen t))
|
|
|
|
(defun dotspacemacs/user-load ()
|
|
"Library to load while dumping.
|
|
This function is called only while dumping Spacemacs configuration. You can
|
|
`require' or `load' the libraries of your choice that will be included in the
|
|
dump."
|
|
)
|
|
|
|
(defun dotspacemacs/user-config ()
|
|
"Configuration for user code:
|
|
This function is called at the very end of Spacemacs startup, after layer
|
|
configuration.
|
|
Put your configuration code here, except for variables that should be set
|
|
before packages are loaded."
|
|
(smartparens-global-mode t)
|
|
(show-smartparens-global-mode +1)
|
|
(add-hook 'after-init-hook 'global-company-mode)
|
|
(add-to-list 'auto-mode-alist '("\\.tpp\\'" . c++-mode))
|
|
(setq split-height-threshold nil)
|
|
(setq split-width-threshold 0)
|
|
(global-set-key [f3] 'other-window)
|
|
(global-set-key [f4] 'ivy-switch-buffer)
|
|
(global-set-key [f5] 'delete-window)
|
|
(global-set-key [f6] 'counsel-recentf)
|
|
(windmove-default-keybindings)
|
|
(load-file "~/.emacs.d/private/recentf-ext.el"); Add dired in recentf
|
|
(setq compilation-finish-function ; Close compilation buffer automatically
|
|
(lambda (buf str)
|
|
(if (null (string-match ".*exited abnormally.*" str))
|
|
;;no errors, make the compilation window go away in a few seconds
|
|
(progn
|
|
(run-at-time
|
|
"1 sec" nil 'delete-windows-on
|
|
(get-buffer-create "*compilation*"))
|
|
(message "No Compilation Errors!")))))
|
|
(setq magit-repository-directories
|
|
'(("/home/coolneng/Documents/Uni/" . 6)
|
|
("/home/coolneng/.dotfiles/" . 0)))
|
|
(setq lsp-ui-doc-enable nil) ; disable lsp-ui-doc
|
|
; Modeline settings
|
|
(doom-modeline-mode t)
|
|
(setq doom-modeline-height 20)
|
|
(setq doom-modeline-buffer-encoding 'nil)
|
|
(setq doom-modeline-major-mode-icon 'nil)
|
|
; Select mode for some extensions
|
|
(add-to-list 'auto-mode-alist '("\\.aiml\\'" . web-mode))
|
|
(add-to-list 'auto-mode-alist '("\\.latex\\'" . latex-mode))
|
|
)
|
|
|
|
;; Do not write anything past this comment. This is where Emacs will
|
|
;; auto-generate custom variable definitions.
|
|
(defun dotspacemacs/emacs-custom-settings ()
|
|
"Emacs custom settings.
|
|
This is an auto-generated function, do not modify its content directly, use
|
|
Emacs customize menu instead.
|
|
This function is called at the very end of Spacemacs initialization."
|
|
(custom-set-variables
|
|
;; custom-set-variables was added by Custom.
|
|
;; If you edit it by hand, you could mess it up, so be careful.
|
|
;; Your init file should contain only one such instance.
|
|
;; If there is more than one, they won't work right.
|
|
'(ansi-color-names-vector
|
|
["#282c34" "#ff6c6b" "#98be65" "#da8548" "#61afef" "#c678dd" "#1f5582" "#abb2bf"])
|
|
'(evil-want-Y-yank-to-eol nil)
|
|
'(fci-rule-color "#f8fce8")
|
|
'(hl-paren-background-colors (quote ("#e8fce8" "#c1e7f8" "#f8e8e8")))
|
|
'(hl-paren-colors (quote ("#40883f" "#0287c8" "#b85c57")))
|
|
'(hl-todo-keyword-faces
|
|
(quote
|
|
(("TODO" . "#dc752f")
|
|
("NEXT" . "#dc752f")
|
|
("THEM" . "#2d9574")
|
|
("PROG" . "#3a81c3")
|
|
("OKAY" . "#3a81c3")
|
|
("DONT" . "#f2241f")
|
|
("FAIL" . "#f2241f")
|
|
("DONE" . "#42ae2c")
|
|
("NOTE" . "#b1951d")
|
|
("KLUDGE" . "#b1951d")
|
|
("HACK" . "#b1951d")
|
|
("TEMP" . "#b1951d")
|
|
("FIXME" . "#dc752f")
|
|
("XXX" . "#dc752f")
|
|
("XXXX" . "#dc752f")
|
|
("???" . "#dc752f"))))
|
|
'(jdee-db-active-breakpoint-face-colors (cons "#f0f0f0" "#4078f2"))
|
|
'(jdee-db-requested-breakpoint-face-colors (cons "#f0f0f0" "#50a14f"))
|
|
'(jdee-db-spec-breakpoint-face-colors (cons "#f0f0f0" "#9ca0a4"))
|
|
'(objed-cursor-color "#e45649")
|
|
'(package-selected-packages
|
|
(quote
|
|
(pandoc-mode ox-pandoc mood-line doom-modeline shrink-path solarized-theme lenlen-theme color-theme-solarized color-theme doom-themes company-reftex company-auctex auctex-latexmk auctex yaml-mode git-gutter-fringe+ git-gutter-fringe fringe-helper git-gutter+ git-gutter diff-hl browse-at-remote lsp-python-ms python cpp-auto-include pretty-symbols blacken test-simple loc-changes load-relative dap-mode bui tree-mode lsp-ui lsp-treemacs treemacs pfuture ace-window avy lsp-java request helm-lsp cquery company-lsp ccls lsp-mode spinner ht dash-functional yasnippet yapfify pytest pyenv-mode py-isort pippel pipenv pyvenv pip-requirements live-py-mode importmagic epc ctable concurrent deferred cython-mode company-anaconda anaconda-mode pythonic flycheck-package package-lint counsel-projectile projectile levenshtein lv rtags web-mode web-beautify tagedit slim-mode scss-mode sass-mode pug-mode prettier-js impatient-mode htmlize simple-httpd haml-mode emmet-mode counsel-css company-web web-completion-data smeargle magit-svn magit-gitflow magit-popup gitignore-templates gitignore-mode gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link evil-magit magit transient git-commit with-editor dash hasklig-mode yasnippet-snippets ivy-hydra counsel swiper helm helm-core ivy flycheck company hydra zerodark-theme xterm-color winum which-key wgrep use-package smex smartparens shell-pop realgud plan9-theme persp-mode pcre2el overseer nameless mvn multi-term mmm-mode meghanada maven-test-mode markdown-toc macrostep ivy-yasnippet ivy-xref ivy-rtags insert-shebang ibuffer-projectile helm-make groovy-mode groovy-imports gradle-mode google-c-style gh-md fuzzy flycheck-rtags flycheck-pos-tip flycheck-irony flycheck-bashate flx fish-mode eyebrowse evil eshell-z eshell-prompt-extras esh-help ensime elisp-slime-nav dotenv-mode disaster diminish company-statistics company-shell company-rtags company-irony-c-headers company-irony company-emacs-eclim company-c-headers cmake-mode cmake-ide clang-format bind-map auto-yasnippet auto-compile async ac-ispell)))
|
|
'(pdf-view-midnight-colors (quote ("#655370" . "#fbf8ef")))
|
|
'(safe-local-variable-values (quote ((eval progn (pp-buffer) (indent-buffer)))))
|
|
'(sml/active-background-color "#98ece8")
|
|
'(sml/active-foreground-color "#424242")
|
|
'(sml/inactive-background-color "#4fa8a8")
|
|
'(sml/inactive-foreground-color "#424242")
|
|
'(vc-annotate-background "#fafafa")
|
|
'(vc-annotate-color-map
|
|
(list
|
|
(cons 20 "#50a14f")
|
|
(cons 40 "#688e35")
|
|
(cons 60 "#807b1b")
|
|
(cons 80 "#986801")
|
|
(cons 100 "#ae7118")
|
|
(cons 120 "#c37b30")
|
|
(cons 140 "#da8548")
|
|
(cons 160 "#c86566")
|
|
(cons 180 "#b74585")
|
|
(cons 200 "#a626a4")
|
|
(cons 220 "#ba3685")
|
|
(cons 240 "#cf4667")
|
|
(cons 260 "#e45649")
|
|
(cons 280 "#d2685f")
|
|
(cons 300 "#c07b76")
|
|
(cons 320 "#ae8d8d")
|
|
(cons 340 "#383a42")
|
|
(cons 360 "#383a42")))
|
|
'(vc-annotate-very-old-color nil))
|
|
(custom-set-faces
|
|
;; custom-set-faces was added by Custom.
|
|
;; If you edit it by hand, you could mess it up, so be careful.
|
|
;; Your init file should contain only one such instance.
|
|
;; If there is more than one, they won't work right.
|
|
)
|
|
)
|
|
|