From be2b76c3a04f939e98fa49b54561991893a4f74a Mon Sep 17 00:00:00 2001 From: coolneng Date: Sat, 18 Jan 2020 16:35:19 +0100 Subject: [PATCH] Come back to Kitty --- alacritty/.config/alacritty/alacritty.yml | 541 ----------- fish/.config/fish/config.fish | 2 +- kitty/.config/kitty/kitty.conf | 1058 +++++++++++++++++++++ neovim/.config/nvim/.netrwhist | 3 +- neovim/.config/nvim/init.vim | 10 +- openbox/.config/openbox/autostart | 5 +- openbox/.config/openbox/rc.xml | 2 +- 7 files changed, 1070 insertions(+), 551 deletions(-) delete mode 100644 alacritty/.config/alacritty/alacritty.yml create mode 100644 kitty/.config/kitty/kitty.conf diff --git a/alacritty/.config/alacritty/alacritty.yml b/alacritty/.config/alacritty/alacritty.yml deleted file mode 100644 index 19bcc90..0000000 --- a/alacritty/.config/alacritty/alacritty.yml +++ /dev/null @@ -1,541 +0,0 @@ -# Configuration for Alacritty, the GPU enhanced terminal emulator. - -# Any items in the `env` entry below will be added as -# environment variables. Some entries may override variables -# set by alacritty itself. -env: - # TERM variable - # - # This value is used to set the `$TERM` environment variable for - # each instance of Alacritty. If it is not present, alacritty will - # check the local terminfo database and use `alacritty` if it is - # available, otherwise `xterm-256color` is used. - TERM: xterm-256color - -#window: - # Window dimensions (changes require restart) - # - # Specified in number of columns/lines, not pixels. - # If both are `0`, this setting is ignored. - #dimensions: - # columns: 0 - # lines: 0 - - # Window position (changes require restart) - # - # Specified in number of pixels. - # If the position is not set, the window manager will handle the placement. - #position: - # x: 0 - # y: 0 - - # Window padding (changes require restart) - # - # Blank space added around the window in pixels. This padding is scaled - # by DPI and the specified value is always added at both opposing sides. - #padding: - # x: 0 - # y: 0 - - # Spread additional padding evenly around the terminal content. - #dynamic_padding: false - - # Window decorations - # - # Values for `decorations`: - # - full: Borders and title bar - # - none: Neither borders nor title bar - # - # Values for `decorations` (macOS only): - # - transparent: Title bar, transparent background and title bar buttons - # - buttonless: Title bar, transparent background, but no title bar buttons - #decorations: full - - # Startup Mode (changes require restart) - # - # Values for `startup_mode`: - # - Windowed - # - Maximized - # - Fullscreen - # - # Values for `startup_mode` (macOS only): - # - SimpleFullscreen - #startup_mode: Windowed - - # Window title - #title: Alacritty - - # Window class (Linux only): - #class: - # Application instance name - #instance: Alacritty - # General application class - #general: Alacritty - - # GTK theme variant (Linux only) - # - # Override the variant of the GTK theme. Commonly supported values are `dark` and `light`. - # Set this to `None` to use the default theme variant. - #gtk_theme_variant: None - -#scrolling: - # Maximum number of lines in the scrollback buffer. - # Specifying '0' will disable scrolling. - #history: 10000 - - # Number of lines the viewport will move for every line scrolled when - # scrollback is enabled (history > 0). - #multiplier: 3 - - # Scroll to the bottom when new text is written to the terminal. - #auto_scroll: false - -# Spaces per Tab (changes require restart) -# -# This setting defines the width of a tab in cells. -# -# Some applications, like Emacs, rely on knowing about the width of a tab. -# To prevent unexpected behavior in these applications, it's also required to -# change the `it` value in terminfo when altering this setting. -#tabspaces: 8 - -# Font configuration -font: - # Normal (roman) font face - normal: - # Font family - # - # Default: - # - (macOS) Menlo - # - (Linux) monospace - # - (Windows) Consolas - family: Go Mono - - # The `style` can be specified to pick a specific face. - style: Regular - - # Bold font face - bold: - # Font family - # - # If the bold family is not specified, it will fall back to the - # value specified for the normal font. - family: Go Mono - - # The `style` can be specified to pick a specific face. - style: Bold - - # Italic font face - italic: - # Font family - # - # If the italic family is not specified, it will fall back to the - # value specified for the normal font. - family: Go Mono - - # The `style` can be specified to pick a specific face. - style: Italic - - # Bold italic font face - bold_italic: - # Font family - # - # If the bold italic family is not specified, it will fall back to the - # value specified for the normal font. - family: Go Mono - - # The `style` can be specified to pick a specific face. - style: Bold Italic - - # Point size - size: 8.0 - - # Offset is the extra space around each character. `offset.y` can be thought of - # as modifying the line spacing, and `offset.x` as modifying the letter spacing. - #offset: - # x: 0 - # y: 0 - - # Glyph offset determines the locations of the glyphs within their cells with - # the default being at the bottom. Increasing `x` moves the glyph to the right, - # increasing `y` moves the glyph upwards. - #glyph_offset: - # x: 0 - # y: 0 - - # Thin stroke font rendering (macOS only) - # - # Thin strokes are suitable for retina displays, but for non-retina screens - # it is recommended to set `use_thin_strokes` to `false` - # - # macOS >= 10.14.x: - # - # If the font quality on non-retina display looks bad then set - # `use_thin_strokes` to `true` and enable font smoothing by running the - # following command: - # `defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO` - # - # This is a global setting and will require a log out or restart to take - # effect. - #use_thin_strokes: true - -# If `true`, bold text is drawn using the bright color variants. -#draw_bold_text_with_bright_colors: true - -# Colors (Tomorrow Night Bright) -# Colors (Iceberg) -colors: - # Default colors - primary: - background: '0x161821' - foreground: '0xd2d4de' - - # Normal colors - normal: - black: '0x161821' - red: '0xe27878' - green: '0xb4be82' - yellow: '0xe2a478' - blue: '0x84a0c6' - magenta: '0xa093c7' - cyan: '0x89b8c2' - white: '0xc6c8d1' - - # Bright colors - bright: - black: '0x6b7089' - red: '0xe98989' - green: '0xc0ca8e' - yellow: '0xe9b189' - blue: '0x91acd1' - magenta: '0xada0d3' - cyan: '0x95c4ce' - white: '0xd2d4de' - # Dim colors - # - # If the dim colors are not set, they will be calculated automatically based - # on the `normal` colors. - #dim: - # black: '0x000000' - # red: '0x8c3336' - # green: '0x7a8530' - # yellow: '0x97822e' - # blue: '0x506d8f' - # magenta: '0x80638e' - # cyan: '0x497e7a' - # white: '0x9a9a9a' - - # Indexed Colors - # - # The indexed colors include all colors from 16 to 256. - # When these are not set, they're filled with sensible defaults. - # - # Example: - # `- { index: 16, color: '0xff00ff' }` - # - #indexed_colors: [] - -# Visual Bell -# -# Any time the BEL code is received, Alacritty "rings" the visual bell. Once -# rung, the terminal background will be set to white and transition back to the -# default background color. You can control the rate of this transition by -# setting the `duration` property (represented in milliseconds). You can also -# configure the transition function by setting the `animation` property. -# -# Values for `animation`: -# - Ease -# - EaseOut -# - EaseOutSine -# - EaseOutQuad -# - EaseOutCubic -# - EaseOutQuart -# - EaseOutQuint -# - EaseOutExpo -# - EaseOutCirc -# - Linear -# -# Specifying a `duration` of `0` will disable the visual bell. -#visual_bell: -# animation: EaseOutExpo -# duration: 0 -# color: '0xffffff' - -# Background opacity -# -# Window opacity as a floating point number from `0.0` to `1.0`. -# The value `0.0` is completely transparent and `1.0` is opaque. -#background_opacity: 1.0 - -#selection: - #semantic_escape_chars: ",│`|:\"' ()[]{}<>\t" - - # When set to `true`, selected text will be copied to the primary clipboard. - #save_to_clipboard: false - -# Allow terminal applications to change Alacritty's window title. -#dynamic_title: true - -#cursor: - # Cursor style - # - # Values for `style`: - # - ▇ Block - # - _ Underline - # - | Beam - #style: Block - - # If this is `true`, the cursor will be rendered as a hollow box when the - # window is not focused. - #unfocused_hollow: true - -# Live config reload (changes require restart) -live_config_reload: false - -# Shell -# -# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`. -# Entries in `shell.args` are passed unmodified as arguments to the shell. -# -# Default: -# - (macOS) /bin/bash --login -# - (Linux) user login shell -# - (Windows) powershell -#shell: -# program: /bin/bash -# args: -# - --login - -# Startup directory -# -# Directory the shell is started in. If this is unset, or `None`, the working -# directory of the parent process will be used. -#working_directory: None - -# Windows 10 ConPTY backend (Windows only) -# -# This will enable better color support and may resolve other issues, -# however this API and its implementation is still young and so is -# disabled by default, as stability may not be as good as the winpty -# backend. -# -# Alacritty will fall back to the WinPTY automatically if the ConPTY -# backend cannot be initialized. -#enable_experimental_conpty_backend: false - -# Send ESC (\x1b) before characters when alt is pressed. -#alt_send_esc: true - -#debug: - # Display the time it takes to redraw each frame. - #render_timer: false - - # Keep the log file after quitting Alacritty. - #persistent_logging: false - - # Log level - # - # Values for `log_level`: - # - None - # - Error - # - Warn - # - Info - # - Debug - # - Trace - #log_level: Warn - - # Print all received window events. - #print_events: false - - # Record all characters and escape sequences as test data. - #ref_test: false - -#mouse: - # Click settings - # - # The `double_click` and `triple_click` settings control the time - # alacritty should wait for accepting multiple clicks as one double - # or triple click. - #double_click: { threshold: 300 } - #triple_click: { threshold: 300 } - - # If this is `true`, the cursor is temporarily hidden when typing. - #hide_when_typing: false - - #url: - # URL launcher - # - # This program is executed when clicking on a text which is recognized as a URL. - # The URL is always added to the command as the last parameter. - # - # When set to `None`, URL launching will be disabled completely. - # - # Default: - # - (macOS) open - # - (Linux) xdg-open - # - (Windows) explorer - #launcher: - # program: xdg-open - # args: [] - - # URL modifiers - # - # These are the modifiers that need to be held down for opening URLs when clicking - # on them. The available modifiers are documented in the key binding section. - #modifiers: None - -# Mouse bindings -# -# Mouse bindings are specified as a list of objects, much like the key -# bindings further below. -# -# Each mouse binding will specify a: -# -# - `mouse`: -# -# - Middle -# - Left -# - Right -# - Numeric identifier such as `5` -# -# - `action` (see key bindings) -# -# And optionally: -# -# - `mods` (see key bindings) -#mouse_bindings: -# - { mouse: Middle, action: PasteSelection } - -# Key bindings -# -# Key bindings are specified as a list of objects. For example, this is the -# default paste binding: -# -# `- { key: V, mods: Control|Shift, action: Paste }` -# -# Each key binding will specify a: -# -# - `key`: Identifier of the key pressed -# -# - A-Z -# - F1-F24 -# - Key0-Key9 -# -# A full list with available key codes can be found here: -# https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants -# -# Instead of using the name of the keys, the `key` field also supports using -# the scancode of the desired key. Scancodes have to be specified as a -# decimal number. This command will allow you to display the hex scancodes -# for certain keys: -# -# `showkey --scancodes`. -# -# Then exactly one of: -# -# - `chars`: Send a byte sequence to the running application -# -# The `chars` field writes the specified string to the terminal. This makes -# it possible to pass escape sequences. To find escape codes for bindings -# like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside -# of tmux. Note that applications use terminfo to map escape sequences back -# to keys. It is therefore required to update the terminfo when changing an -# escape sequence. -# -# - `action`: Execute a predefined action -# -# - Copy -# - Paste -# - PasteSelection -# - IncreaseFontSize -# - DecreaseFontSize -# - ResetFontSize -# - ScrollPageUp -# - ScrollPageDown -# - ScrollLineUp -# - ScrollLineDown -# - ScrollToTop -# - ScrollToBottom -# - ClearHistory -# - Hide -# - Quit -# - ToggleFullscreen -# - SpawnNewInstance -# - ClearLogNotice -# - ReceiveChar -# - None -# -# (macOS only): -# - ToggleSimpleFullscreen: Enters fullscreen without occupying another space -# -# - `command`: Fork and execute a specified command plus arguments -# -# The `command` field must be a map containing a `program` string and an -# `args` array of command line parameter strings. For example: -# `{ program: "alacritty", args: ["-e", "vttest"] }` -# -# And optionally: -# -# - `mods`: Key modifiers to filter binding actions -# -# - Command -# - Control -# - Option -# - Super -# - Shift -# - Alt -# -# Multiple `mods` can be combined using `|` like this: -# `mods: Control|Shift`. -# Whitespace and capitalization are relevant and must match the example. -# -# - `mode`: Indicate a binding for only specific terminal reported modes -# -# This is mainly used to send applications the correct escape sequences -# when in different modes. -# -# - AppCursor -# - AppKeypad -# - Alt -# -# A `~` operator can be used before a mode to apply the binding whenever -# the mode is *not* active, e.g. `~Alt`. -# -# Bindings are always filled by default, but will be replaced when a new -# binding with the same triggers is defined. To unset a default binding, it can -# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for -# a no-op if you do not wish to receive input characters for that binding. -#key_bindings: - # (Windows/Linux only) - #- { key: V, mods: Control|Shift, action: Paste } - #- { key: C, mods: Control|Shift, action: Copy } - #- { key: Insert, mods: Shift, action: PasteSelection } - #- { key: Key0, mods: Control, action: ResetFontSize } - #- { key: Equals, mods: Control, action: IncreaseFontSize } - #- { key: Add, mods: Control, action: IncreaseFontSize } - #- { key: Subtract, mods: Control, action: DecreaseFontSize } - #- { key: Minus, mods: Control, action: DecreaseFontSize } - #- { key: Return, mods: Alt, action: ToggleFullscreen } - - # (macOS only) - #- { key: Key0, mods: Command, action: ResetFontSize } - #- { key: Equals, mods: Command, action: IncreaseFontSize } - #- { key: Add, mods: Command, action: IncreaseFontSize } - #- { key: Minus, mods: Command, action: DecreaseFontSize } - #- { key: K, mods: Command, action: ClearHistory } - #- { key: K, mods: Command, chars: "\x0c" } - #- { key: V, mods: Command, action: Paste } - #- { key: C, mods: Command, action: Copy } - #- { key: H, mods: Command, action: Hide } - #- { key: Q, mods: Command, action: Quit } - #- { key: W, mods: Command, action: Quit } - #- { key: F, mods: Command|Control, action: ToggleFullscreen } - - #- { key: Paste, action: Paste } - #- { key: Copy, action: Copy } - #- { key: L, mods: Control, action: ClearLogNotice } - #- { key: L, mods: Control, chars: "\x0c" } - #- { key: PageUp, mods: Shift, action: ScrollPageUp, mode: ~Alt } - #- { key: PageDown, mods: Shift, action: ScrollPageDown, mode: ~Alt } - #- { key: Home, mods: Shift, action: ScrollToTop, mode: ~Alt } - #- { key: End, mods: Shift, action: ScrollToBottom, mode: ~Alt } diff --git a/fish/.config/fish/config.fish b/fish/.config/fish/config.fish index f9313bb..06a1db7 100644 --- a/fish/.config/fish/config.fish +++ b/fish/.config/fish/config.fish @@ -18,8 +18,8 @@ alias peerflix "peerflix -d" alias xclip "xclip -selection clipboard" alias xi "xbps-install -S" alias xu "xbps-install -Su" -alias xr "xbps-remove -R" alias xc "xbps-remove -o" +alias xr "xbps-remove -Rf" alias xq "xbps-query -Rs" alias wlan "iw dev wlp2s0 scan | grep SSID" alias bc "bc -l" diff --git a/kitty/.config/kitty/kitty.conf b/kitty/.config/kitty/kitty.conf new file mode 100644 index 0000000..717d90b --- /dev/null +++ b/kitty/.config/kitty/kitty.conf @@ -0,0 +1,1058 @@ +# vim:fileencoding=utf-8:ft=conf:foldmethod=marker + +#: Fonts {{{ + +#: kitty has very powerful font management. You can configure +#: individual font faces and even specify special fonts for particular +#: characters. + +font_family Go Mono +bold_font Go Mono Bold +italic_font Go Mono Italic +bold_italic_font Go Mono Bold Italic + +#: You can specify different fonts for the bold/italic/bold-italic +#: variants. To get a full list of supported fonts use the `kitty +#: list-fonts` command. By default they are derived automatically, by +#: the OSes font system. Setting them manually is useful for font +#: families that have many weight variants like Book, Medium, Thick, +#: etc. For example:: + +#: font_family Operator Mono Book +#: bold_font Operator Mono Medium +#: italic_font Operator Mono Book Italic +#: bold_italic_font Operator Mono Medium Italic + +font_size 9.0 + +#: Font size (in pts) + +adjust_line_height 0 +adjust_column_width 0 + +#: Change the size of each character cell kitty renders. You can use +#: either numbers, which are interpreted as pixels or percentages +#: (number followed by %), which are interpreted as percentages of the +#: unmodified values. You can use negative pixels or percentages less +#: than 100% to reduce sizes (but this might cause rendering +#: artifacts). + +# symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols + +#: Map the specified unicode codepoints to a particular font. Useful +#: if you need special rendering for some symbols, such as for +#: Powerline. Avoids the need for patched fonts. Each unicode code +#: point is specified in the form U+. You +#: can specify multiple code points, separated by commas and ranges +#: separated by hyphens. symbol_map itself can be specified multiple +#: times. Syntax is:: + +#: symbol_map codepoints Font Family Name + +disable_ligatures never + +#: Choose how you want to handle multi-character ligatures. The +#: default is to always render them. You can tell kitty to not render +#: them when the cursor is over them by using cursor to make editing +#: easier, or have kitty never render them at all by using always, if +#: you don't like them. The ligature strategy can be set per-window +#: either using the kitty remote control facility or by defining +#: shortcuts for it in kitty.conf, for example:: + +#: map alt+1 disable_ligatures_in active always +#: map alt+2 disable_ligatures_in all never +#: map alt+3 disable_ligatures_in tab cursor + +box_drawing_scale 0.001, 1, 1.5, 2 + +#: Change the sizes of the lines used for the box drawing unicode +#: characters These values are in pts. They will be scaled by the +#: monitor DPI to arrive at a pixel value. There must be four values +#: corresponding to thin, normal, thick, and very thick lines. + +#: }}} + +#: Cursor customization {{{ + +cursor #cccccc + +#: Default cursor color + +cursor_text_color #111111 + +#: Choose the color of text under the cursor. If you want it rendered +#: with the background color of the cell underneath instead, use the +#: special keyword: background + +cursor_shape block + +#: The cursor shape can be one of (block, beam, underline) + +cursor_blink_interval -1 + +#: The interval (in seconds) at which to blink the cursor. Set to zero +#: to disable blinking. Negative values mean use system default. Note +#: that numbers smaller than repaint_delay will be limited to +#: repaint_delay. + +cursor_stop_blinking_after 15.0 + +#: Stop blinking cursor after the specified number of seconds of +#: keyboard inactivity. Set to zero to never stop blinking. + +#: }}} + +#: Scrollback {{{ + +scrollback_lines 200 + +#: Number of lines of history to keep in memory for scrolling back. +#: Memory is allocated on demand. Negative numbers are (effectively) +#: infinite scrollback. Note that using very large scrollback is not +#: recommended as it can slow down resizing of the terminal and also +#: use large amounts of RAM. + +scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER + +#: Program with which to view scrollback in a new window. The +#: scrollback buffer is passed as STDIN to this program. If you change +#: it, make sure the program you use can handle ANSI escape sequences +#: for colors and text formatting. INPUT_LINE_NUMBER in the command +#: line above will be replaced by an integer representing which line +#: should be at the top of the screen. + +scrollback_pager_history_size 0 + +#: Separate scrollback history size, used only for browsing the +#: scrollback buffer (in MB). This separate buffer is not available +#: for interactive scrolling but will be piped to the pager program +#: when viewing scrollback buffer in a separate window. The current +#: implementation stores one character in 4 bytes, so approximatively +#: 2500 lines per megabyte at 100 chars per line. A value of zero or +#: less disables this feature. The maximum allowed size is 4GB. + +wheel_scroll_multiplier 5.0 + +#: Modify the amount scrolled by the mouse wheel. Note this is only +#: used for low precision scrolling devices, not for high precision +#: scrolling on platforms such as macOS and Wayland. Use negative +#: numbers to change scroll direction. + +touch_scroll_multiplier 1.0 + +#: Modify the amount scrolled by a touchpad. Note this is only used +#: for high precision scrolling devices on platforms such as macOS and +#: Wayland. Use negative numbers to change scroll direction. + +#: }}} + +#: Mouse {{{ + +mouse_hide_wait 3.0 + +#: Hide mouse cursor after the specified number of seconds of the +#: mouse not being used. Set to zero to disable mouse cursor hiding. +#: Set to a negative value to hide the mouse cursor immediately when +#: typing text. + +url_color #0087bd +url_style curly + +#: The color and style for highlighting URLs on mouse-over. url_style +#: can be one of: none, single, double, curly + +open_url_modifiers kitty_mod + +#: The modifier keys to press when clicking with the mouse on URLs to +#: open the URL + +open_url_with default + +#: The program with which to open URLs that are clicked on. The +#: special value default means to use the operating system's default +#: URL handler. + +copy_on_select no + +#: Copy to clipboard or a private buffer on select. With this set to +#: clipboard, simply selecting text with the mouse will cause the text +#: to be copied to clipboard. Useful on platforms such as macOS that +#: do not have the concept of primary selections. You can instead +#: specify a name such as a1 to copy to a private kitty buffer +#: instead. Map a shortcut with the paste_from_buffer action to paste +#: from this private buffer. For example:: + +#: map cmd+shift+v paste_from_buffer a1 + +#: Note that copying to the clipboard is a security risk, as all +#: programs, including websites open in your browser can read the +#: contents of the system clipboard. + +strip_trailing_spaces never + +#: Remove spaces at the end of lines when copying to clipboard. A +#: value of smart will do it when using normal selections, but not +#: rectangle selections. always will always do it. + +rectangle_select_modifiers ctrl+alt + +#: The modifiers to use rectangular selection (i.e. to select text in +#: a rectangular block with the mouse) + +terminal_select_modifiers shift + +#: The modifiers to override mouse selection even when a terminal +#: application has grabbed the mouse + +select_by_word_characters :@-./_~?&=%+# + +#: Characters considered part of a word when double clicking. In +#: addition to these characters any character that is marked as an +#: alphanumeric character in the unicode database will be matched. + +click_interval -1.0 + +#: The interval between successive clicks to detect double/triple +#: clicks (in seconds). Negative numbers will use the system default +#: instead, if available, or fallback to 0.5. + +focus_follows_mouse no + +#: Set the active window to the window under the mouse when moving the +#: mouse around + +pointer_shape_when_grabbed arrow + +#: The shape of the mouse pointer when the program running in the +#: terminal grabs the mouse. + +#: }}} + +#: Performance tuning {{{ + +repaint_delay 30 + +#: Delay (in milliseconds) between screen updates. Decreasing it, +#: increases frames-per-second (FPS) at the cost of more CPU usage. +#: The default value yields ~100 FPS which is more than sufficient for +#: most uses. Note that to actually achieve 100 FPS you have to either +#: set sync_to_monitor to no or use a monitor with a high refresh +#: rate. Also, to minimize latency when there is pending input to be +#: processed, repaint_delay is ignored. + +input_delay 10 + +#: Delay (in milliseconds) before input from the program running in +#: the terminal is processed. Note that decreasing it will increase +#: responsiveness, but also increase CPU usage and might cause flicker +#: in full screen programs that redraw the entire screen on each loop, +#: because kitty is so fast that partial screen updates will be drawn. + +sync_to_monitor yes + +#: Sync screen updates to the refresh rate of the monitor. This +#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing) +#: when scrolling. However, it limits the rendering speed to the +#: refresh rate of your monitor. With a very high speed mouse/high +#: keyboard repeat rate, you may notice some slight input latency. If +#: so, set this to no. + +#: }}} + +#: Terminal bell {{{ + +enable_audio_bell no + +#: Enable/disable the audio bell. Useful in environments that require +#: silence. + +visual_bell_duration 0.0 + +#: Visual bell duration. Flash the screen when a bell occurs for the +#: specified number of seconds. Set to zero to disable. + +window_alert_on_bell yes + +#: Request window attention on bell. Makes the dock icon bounce on +#: macOS or the taskbar flash on linux. + +bell_on_tab yes + +#: Show a bell symbol on the tab if a bell occurs in one of the +#: windows in the tab and the window is not the currently focused +#: window + +command_on_bell none + +#: Program to run when a bell occurs. + +#: }}} + +#: Window layout {{{ + +remember_window_size yes +initial_window_width 640 +initial_window_height 400 + +#: If enabled, the window size will be remembered so that new +#: instances of kitty will have the same size as the previous +#: instance. If disabled, the window will initially have size +#: configured by initial_window_width/height, in pixels. You can use a +#: suffix of "c" on the width/height values to have them interpreted +#: as number of cells instead of pixels. + +enabled_layouts * + +#: The enabled window layouts. A comma separated list of layout names. +#: The special value all means all layouts. The first listed layout +#: will be used as the startup layout. For a list of available +#: layouts, see the +#: https://sw.kovidgoyal.net/kitty/index.html#layouts. + +window_resize_step_cells 2 +window_resize_step_lines 2 + +#: The step size (in units of cell width/cell height) to use when +#: resizing windows. The cells value is used for horizontal resizing +#: and the lines value for vertical resizing. + +window_border_width 1.0 + +#: The width (in pts) of window borders. Will be rounded to the +#: nearest number of pixels based on screen resolution. Note that +#: borders are displayed only when more than one window is visible. +#: They are meant to separate multiple windows. + +draw_minimal_borders yes + +#: Draw only the minimum borders needed. This means that only the +#: minimum needed borders for inactive windows are drawn. That is only +#: the borders that separate the inactive window from a neighbor. Note +#: that setting a non-zero window margin overrides this and causes all +#: borders to be drawn. + +window_margin_width 0.0 + +#: The window margin (in pts) (blank area outside the border) + +single_window_margin_width -1000.0 + +#: The window margin (in pts) to use when only a single window is +#: visible. Negative values will cause the value of +#: window_margin_width to be used instead. + +window_padding_width 0.0 + +#: The window padding (in pts) (blank area between the text and the +#: window border) + +placement_strategy center + +#: When the window size is not an exact multiple of the cell size, the +#: cell area of the terminal window will have some extra padding on +#: the sides. You can control how that padding is distributed with +#: this option. Using a value of center means the cell area will be +#: placed centrally. A value of top-left means the padding will be on +#: only the bottom and right edges. + +active_border_color #00ff00 + +#: The color for the border of the active window. Set this to none to +#: not draw borders around the active window. + +inactive_border_color #cccccc + +#: The color for the border of inactive windows + +bell_border_color #ff5a00 + +#: The color for the border of inactive windows in which a bell has +#: occurred + +inactive_text_alpha 1.0 + +#: Fade the text in inactive windows by the specified amount (a number +#: between zero and one, with zero being fully faded). + +hide_window_decorations no + +#: Hide the window decorations (title-bar and window borders). Whether +#: this works and exactly what effect it has depends on the window +#: manager/operating system. + +resize_debounce_time 0.1 + +#: The time (in seconds) to wait before redrawing the screen when a +#: resize event is received. On platforms such as macOS, where the +#: operating system sends events corresponding to the start and end of +#: a resize, this number is ignored. + +resize_draw_strategy static + +#: Choose how kitty draws a window while a resize is in progress. A +#: value of static means draw the current window contents, mostly +#: unchanged. A value of scale means draw the current window contents +#: scaled. A value of blank means draw a blank window. A value of size +#: means show the window size in cells. + +#: }}} + +#: Tab bar {{{ + +tab_bar_edge bottom + +#: Which edge to show the tab bar on, top or bottom + +tab_bar_margin_width 0.0 + +#: The margin to the left and right of the tab bar (in pts) + +tab_bar_style fade + +#: The tab bar style, can be one of: fade, separator or hidden. In the +#: fade style, each tab's edges fade into the background color, in the +#: separator style, tabs are separated by a configurable separator. + +tab_bar_min_tabs 2 + +#: The minimum number of tabs that must exist before the tab bar is +#: shown + +tab_switch_strategy previous + +#: The algorithm to use when switching to a tab when the current tab +#: is closed. The default of previous will switch to the last used +#: tab. A value of left will switch to the tab to the left of the +#: closed tab. A value of last will switch to the right-most tab. + +tab_fade 0.25 0.5 0.75 1 + +#: Control how each tab fades into the background when using fade for +#: the tab_bar_style. Each number is an alpha (between zero and one) +#: that controls how much the corresponding cell fades into the +#: background, with zero being no fade and one being full fade. You +#: can change the number of cells used by adding/removing entries to +#: this list. + +tab_separator " ┇" + +#: The separator between tabs in the tab bar when using separator as +#: the tab_bar_style. + +tab_title_template {title} + +#: A template to render the tab title. The default just renders the +#: title. If you wish to include the tab-index as well, use something +#: like: {index}: {title}. Useful if you have shortcuts mapped for +#: goto_tab N. + +active_tab_foreground #000 +active_tab_background #eee +active_tab_font_style bold-italic +inactive_tab_foreground #444 +inactive_tab_background #999 +inactive_tab_font_style normal + +#: Tab bar colors and styles + +#: }}} + +#: Color scheme {{{ + +foreground #c6c8d1 +background #161821 + +#: The foreground and background colors + +background_opacity 1.0 + +#: The opacity of the background. A number between 0 and 1, where 1 is +#: opaque and 0 is fully transparent. This will only work if +#: supported by the OS (for instance, when using a compositor under +#: X11). Note that it only sets the default background color's +#: opacity. This is so that things like the status bar in vim, +#: powerline prompts, etc. still look good. But it means that if you +#: use a color theme with a background color in your editor, it will +#: not be rendered as transparent. Instead you should change the +#: default background color in your kitty config and not use a +#: background color in the editor color scheme. Or use the escape +#: codes to set the terminals default colors in a shell script to +#: launch your editor. Be aware that using a value less than 1.0 is a +#: (possibly significant) performance hit. If you want to dynamically +#: change transparency of windows set dynamic_background_opacity to +#: yes (this is off by default as it has a performance cost) + +dynamic_background_opacity no + +#: Allow changing of the background_opacity dynamically, using either +#: keyboard shortcuts (increase_background_opacity and +#: decrease_background_opacity) or the remote control facility. + +dim_opacity 0.75 + +#: How much to dim text that has the DIM/FAINT attribute set. One +#: means no dimming and zero means fully dimmed (i.e. invisible). + +selection_foreground #000000 + +#: The foreground for text selected with the mouse. A value of none +#: means to leave the color unchanged. + +selection_background #fffacd + +#: The background for text selected with the mouse. + + +#: The 16 terminal colors. There are 8 basic colors, each color has a +#: dull and bright version. You can also set the remaining colors from +#: the 256 color table as color16 to color255. + +color0 #161821 +color8 #6b7089 + +#: black + +color1 #e27878 +color9 #e98989 + +#: red + +color2 #b4be82 +color10 #c0ca8e + +#: green + +color3 #e2a478 +color11 #e9b189 + +#: yellow + +color4 #84a0c6 +color12 #91acd1 + +#: blue + +color5 #a093c7 +color13 #ada0d3 + +#: magenta + +color6 #89b8c2 +color14 #95c4ce + +#: cyan + +color7 #c6c8d1 +color15 #d2d4de + +#: white + +#: }}} + +#: Advanced {{{ + +shell . + +#: The shell program to execute. The default value of . means to use +#: whatever shell is set as the default shell for the current user. +#: Note that on macOS if you change this, you might need to add +#: --login to ensure that the shell starts in interactive mode and +#: reads its startup rc files. + +editor . + +#: The console editor to use when editing the kitty config file or +#: similar tasks. A value of . means to use the environment variable +#: EDITOR. Note that this environment variable has to be set not just +#: in your shell startup scripts but system-wide, otherwise kitty will +#: not see it. + +close_on_child_death no + +#: Close the window when the child process (shell) exits. If no (the +#: default), the terminal will remain open when the child exits as +#: long as there are still processes outputting to the terminal (for +#: example disowned or backgrounded processes). If yes, the window +#: will close as soon as the child process exits. Note that setting it +#: to yes means that any background processes still using the terminal +#: can fail silently because their stdout/stderr/stdin no longer work. + +allow_remote_control no + +#: Allow other programs to control kitty. If you turn this on other +#: programs can control all aspects of kitty, including sending text +#: to kitty windows, opening new windows, closing windows, reading the +#: content of windows, etc. Note that this even works over ssh +#: connections. + +# env + +#: Specify environment variables to set in all child processes. Note +#: that environment variables are expanded recursively, so if you +#: use:: + +#: env MYVAR1=a +#: env MYVAR2=${MYVAR1}/${HOME}/b + +#: The value of MYVAR2 will be a//b. + +update_check_interval 24 + +#: Periodically check if an update to kitty is available. If an update +#: is found a system notification is displayed informing you of the +#: available update. The default is to check every 24 hrs, set to zero +#: to disable. + +startup_session none + +#: Path to a session file to use for all kitty instances. Can be +#: overridden by using the kitty --session command line option for +#: individual instances. See +#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty +#: documentation for details. Note that relative paths are interpreted +#: with respect to the kitty config directory. Environment variables +#: in the path are expanded. + +clipboard_control write-clipboard write-primary + +#: Allow programs running in kitty to read and write from the +#: clipboard. You can control exactly which actions are allowed. The +#: set of possible actions is: write-clipboard read-clipboard write- +#: primary read-primary. You can additionally specify no-append to +#: disable kitty's protocol extension for clipboard concatenation. The +#: default is to allow writing to the clipboard and primary selection +#: with concatenation enabled. Note that enabling the read +#: functionality is a security risk as it means that any program, even +#: one running on a remote server via SSH can read your clipboard. + +term xterm-kitty + +#: The value of the TERM environment variable to set. Changing this +#: can break many terminal programs, only change it if you know what +#: you are doing, not because you read some advice on Stack Overflow +#: to change it. The TERM variable is used by various programs to get +#: information about the capabilities and behavior of the terminal. If +#: you change it, depending on what programs you run, and how +#: different the terminal you are changing it to is, various things +#: from key-presses, to colors, to various advanced features may not +#: work. + +#: }}} + +#: OS specific tweaks {{{ + +macos_titlebar_color system + +#: Change the color of the kitty window's titlebar on macOS. A value +#: of system means to use the default system color, a value of +#: background means to use the background color of the currently +#: active window and finally you can use an arbitrary color, such as +#: #12af59 or red. WARNING: This option works by using a hack, as +#: there is no proper Cocoa API for it. It sets the background color +#: of the entire window and makes the titlebar transparent. As such it +#: is incompatible with background_opacity. If you want to use both, +#: you are probably better off just hiding the titlebar with +#: hide_window_decorations. + +macos_option_as_alt no + +#: Use the option key as an alt key. With this set to no, kitty will +#: use the macOS native Option+Key = unicode character behavior. This +#: will break any Alt+key keyboard shortcuts in your terminal +#: programs, but you can use the macOS unicode input technique. You +#: can use the values: left, right, or both to use only the left, +#: right or both Option keys as Alt, instead. + +macos_hide_from_tasks no + +#: Hide the kitty window from running tasks (Option+Tab) on macOS. + +macos_quit_when_last_window_closed no + +#: Have kitty quit when all the top-level windows are closed. By +#: default, kitty will stay running, even with no open windows, as is +#: the expected behavior on macOS. + +macos_window_resizable yes + +#: Disable this if you want kitty top-level (OS) windows to not be +#: resizable on macOS. + +macos_thicken_font 0 + +#: Draw an extra border around the font with the given width, to +#: increase legibility at small font sizes. For example, a value of +#: 0.75 will result in rendering that looks similar to sub-pixel +#: antialiasing at common font sizes. + +macos_traditional_fullscreen no + +#: Use the traditional full-screen transition, that is faster, but +#: less pretty. + +macos_show_window_title_in all + +#: Show or hide the window title in the macOS window or menu-bar. A +#: value of window will show the title of the currently active window +#: at the top of the macOS window. A value of menubar will show the +#: title of the currently active window in the macOS menu-bar, making +#: use of otherwise wasted space. all will show the title everywhere +#: and none hides the title in the window and the menu-bar. + +macos_custom_beam_cursor no + +#: Enable/disable custom mouse cursor for macOS that is easier to see +#: on both light and dark backgrounds. WARNING: this might make your +#: mouse cursor invisible on dual GPU machines. + +linux_display_server auto + +#: Choose between Wayland and X11 backends. By default, an appropriate +#: backend based on the system state is chosen automatically. Set it +#: to x11 or wayland to force the choice. + +#: }}} + +#: Keyboard shortcuts {{{ + +#: For a list of key names, see: GLFW keys +#: . The name to +#: use is the part after the GLFW_KEY_ prefix. For a list of modifier +#: names, see: GLFW mods +#: + +#: On Linux you can also use XKB key names to bind keys that are not +#: supported by GLFW. See XKB keys +#: for a list of key names. The name to use is the part +#: after the XKB_KEY_ prefix. Note that you should only use an XKB key +#: name for keys that are not present in the list of GLFW keys. + +#: Finally, you can use raw system key codes to map keys. To see the +#: system key code for a key, start kitty with the kitty --debug- +#: keyboard option. Then kitty will output some debug text for every +#: key event. In that text look for ``native_code`` the value of that +#: becomes the key name in the shortcut. For example: + +#: .. code-block:: none + +#: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a' + +#: Here, the key name for the A key is 0x61 and you can use it with:: + +#: map ctrl+0x61 something + +#: to map ctrl+a to something. + +#: You can use the special action no_op to unmap a keyboard shortcut +#: that is assigned in the default configuration:: + +#: map kitty_mod+space no_op + +#: You can combine multiple actions to be triggered by a single +#: shortcut, using the syntax below:: + +#: map key combine action1 action2 action3 ... + +#: For example:: + +#: map kitty_mod+e combine : new_window : next_layout + +#: this will create a new window and switch to the next available +#: layout + +#: You can use multi-key shortcuts using the syntax shown below:: + +#: map key1>key2>key3 action + +#: For example:: + +#: map ctrl+f>2 set_font_size 20 + +kitty_mod ctrl+shift + +#: The value of kitty_mod is used as the modifier for all default +#: shortcuts, you can change it in your kitty.conf to change the +#: modifiers for all the default shortcuts. + +clear_all_shortcuts no + +#: You can have kitty remove all shortcut definition seen up to this +#: point. Useful, for instance, to remove the default shortcuts. + +# kitten_alias hints hints --hints-offset=0 + +#: You can create aliases for kitten names, this allows overriding the +#: defaults for kitten options and can also be used to shorten +#: repeated mappings of the same kitten with a specific group of +#: options. For example, the above alias changes the default value of +#: kitty +kitten hints --hints-offset to zero for all mappings, +#: including the builtin ones. + +#: Clipboard {{{ + +map kitty_mod+c copy_to_clipboard + +#: There is also a copy_or_interrupt action that can be optionally +#: mapped to Ctrl+c. It will copy only if there is a selection and +#: send an interrupt otherwise. + +map kitty_mod+v paste_from_clipboard +map kitty_mod+s paste_from_selection +map shift+insert paste_from_selection +map kitty_mod+o pass_selection_to_program + +#: You can also pass the contents of the current selection to any +#: program using pass_selection_to_program. By default, the system's +#: open program is used, but you can specify your own, the selection +#: will be passed as a command line argument to the program, for +#: example:: + +#: map kitty_mod+o pass_selection_to_program firefox + +#: You can pass the current selection to a terminal program running in +#: a new kitty window, by using the @selection placeholder:: + +#: map kitty_mod+y new_window less @selection + +#: }}} + +#: Scrolling {{{ + +map kitty_mod+up scroll_line_up +map kitty_mod+k scroll_line_up +map kitty_mod+down scroll_line_down +map kitty_mod+j scroll_line_down +map kitty_mod+page_up scroll_page_up +map kitty_mod+page_down scroll_page_down +map kitty_mod+home scroll_home +map kitty_mod+end scroll_end +map kitty_mod+h show_scrollback + +#: You can pipe the contents of the current screen + history buffer as +#: STDIN to an arbitrary program using the ``pipe`` function. For +#: example, the following opens the scrollback buffer in less in an +#: overlay window:: + +#: map f1 pipe @ansi overlay less +G -R + +#: For more details on piping screen and buffer contents to external +#: programs, see pipe. + +#: }}} + +#: Window management {{{ + +map kitty_mod+enter new_window + +#: You can open a new window running an arbitrary program, for +#: example:: + +#: map kitty_mod+y new_window mutt + +#: You can open a new window with the current working directory set to +#: the working directory of the current window using:: + +#: map ctrl+alt+enter new_window_with_cwd + +#: You can open a new window that is allowed to control kitty via the +#: kitty remote control facility by prefixing the command line with @. +#: Any programs running in that window will be allowed to control +#: kitty. For example:: + +#: map ctrl+enter new_window @ some_program + +#: You can open a new window next to the currently active window or as +#: the first window, with:: + +#: map ctrl+n new_window !neighbor some_program +#: map ctrl+f new_window !first some_program + +map kitty_mod+n new_os_window + +#: Works like new_window above, except that it opens a top level OS +#: kitty window. In particular you can use new_os_window_with_cwd to +#: open a window with the current working directory. + +map kitty_mod+w close_window +map kitty_mod+] next_window +map kitty_mod+[ previous_window +map kitty_mod+f move_window_forward +map kitty_mod+b move_window_backward +map kitty_mod+` move_window_to_top +map kitty_mod+r start_resizing_window +map kitty_mod+1 first_window +map kitty_mod+2 second_window +map kitty_mod+3 third_window +map kitty_mod+4 fourth_window +map kitty_mod+5 fifth_window +map kitty_mod+6 sixth_window +map kitty_mod+7 seventh_window +map kitty_mod+8 eighth_window +map kitty_mod+9 ninth_window +map kitty_mod+0 tenth_window +#: }}} + +#: Tab management {{{ + +map kitty_mod+right next_tab +map kitty_mod+left previous_tab +map kitty_mod+t new_tab +map kitty_mod+q close_tab +map kitty_mod+. move_tab_forward +map kitty_mod+, move_tab_backward +map kitty_mod+alt+t set_tab_title + +#: You can also create shortcuts to go to specific tabs, with 1 being +#: the first tab, 2 the second tab and -1 being the previously active +#: tab:: + +#: map ctrl+alt+1 goto_tab 1 +#: map ctrl+alt+2 goto_tab 2 + +#: Just as with new_window above, you can also pass the name of +#: arbitrary commands to run when using new_tab and use +#: new_tab_with_cwd. Finally, if you want the new tab to open next to +#: the current tab rather than at the end of the tabs list, use:: + +#: map ctrl+t new_tab !neighbor [optional cmd to run] +#: }}} + +#: Layout management {{{ + +map kitty_mod+l next_layout + +#: You can also create shortcuts to switch to specific layouts:: + +#: map ctrl+alt+t goto_layout tall +#: map ctrl+alt+s goto_layout stack + +#: Similarly, to switch back to the previous layout:: + +#: map ctrl+alt+p last_used_layout +#: }}} + +#: Font sizes {{{ + +#: You can change the font size for all top-level kitty OS windows at +#: a time or only the current one. + +map kitty_mod+equal change_font_size all +2.0 +map kitty_mod+minus change_font_size all -2.0 +map kitty_mod+backspace change_font_size all 0 + +#: To setup shortcuts for specific font sizes:: + +#: map kitty_mod+f6 change_font_size all 10.0 + +#: To setup shortcuts to change only the current OS window's font +#: size:: + +#: map kitty_mod+f6 change_font_size current 10.0 +#: }}} + +#: Select and act on visible text {{{ + +#: Use the hints kitten to select text and either pass it to an +#: external program or insert it into the terminal or copy it to the +#: clipboard. + +map kitty_mod+e kitten hints + +#: Open a currently visible URL using the keyboard. The program used +#: to open the URL is specified in open_url_with. + +map kitty_mod+p>f kitten hints --type path --program - + +#: Select a path/filename and insert it into the terminal. Useful, for +#: instance to run git commands on a filename output from a previous +#: git command. + +map kitty_mod+p>shift+f kitten hints --type path + +#: Select a path/filename and open it with the default open program. + +map kitty_mod+p>l kitten hints --type line --program - + +#: Select a line of text and insert it into the terminal. Use for the +#: output of things like: ls -1 + +map kitty_mod+p>w kitten hints --type word --program - + +#: Select words and insert into terminal. + +map kitty_mod+p>h kitten hints --type hash --program - + +#: Select something that looks like a hash and insert it into the +#: terminal. Useful with git, which uses sha1 hashes to identify +#: commits + + +#: The hints kitten has many more modes of operation that you can map +#: to different shortcuts. For a full description see kittens/hints. +#: }}} + +#: Miscellaneous {{{ + +map kitty_mod+f11 toggle_fullscreen +map kitty_mod+f10 toggle_maximized +map kitty_mod+u kitten unicode_input +map kitty_mod+f2 edit_config_file +map kitty_mod+escape kitty_shell window + +#: Open the kitty shell in a new window/tab/overlay/os_window to +#: control kitty using commands. + +map kitty_mod+a>m set_background_opacity +0.1 +map kitty_mod+a>l set_background_opacity -0.1 +map kitty_mod+a>1 set_background_opacity 1 +map kitty_mod+a>d set_background_opacity default +map kitty_mod+delete clear_terminal reset active + +#: You can create shortcuts to clear/reset the terminal. For example:: + +#: # Reset the terminal +#: map kitty_mod+f9 clear_terminal reset active +#: # Clear the terminal screen by erasing all contents +#: map kitty_mod+f10 clear_terminal clear active +#: # Clear the terminal scrollback by erasing it +#: map kitty_mod+f11 clear_terminal scrollback active +#: # Scroll the contents of the screen into the scrollback +#: map kitty_mod+f12 clear_terminal scroll active + +#: If you want to operate on all windows instead of just the current +#: one, use all instead of active. + +#: It is also possible to remap Ctrl+L to both scroll the current +#: screen contents into the scrollback buffer and clear the screen, +#: instead of just clearing the screen:: + +#: map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c + + +#: You can tell kitty to send arbitrary (UTF-8) encoded text to the +#: client program when pressing specified shortcut keys. For example:: + +#: map ctrl+alt+a send_text all Special text + +#: This will send "Special text" when you press the ctrl+alt+a key +#: combination. The text to be sent is a python string literal so you +#: can use escapes like \x1b to send control codes or \u21fb to send +#: unicode characters (or you can just input the unicode characters +#: directly as UTF-8 text). The first argument to send_text is the +#: keyboard modes in which to activate the shortcut. The possible +#: values are normal or application or kitty or a comma separated +#: combination of them. The special keyword all means all modes. The +#: modes normal and application refer to the DECCKM cursor key mode +#: for terminals, and kitty refers to the special kitty extended +#: keyboard protocol. + +#: Another example, that outputs a word and then moves the cursor to +#: the start of the line (same as pressing the Home key):: + +#: map ctrl+alt+a send_text normal Word\x1b[H +#: map ctrl+alt+a send_text application Word\x1bOH + +#: }}} + +# }}} diff --git a/neovim/.config/nvim/.netrwhist b/neovim/.config/nvim/.netrwhist index 7d9ab93..8f18049 100644 --- a/neovim/.config/nvim/.netrwhist +++ b/neovim/.config/nvim/.netrwhist @@ -1,3 +1,4 @@ let g:netrw_dirhistmax =10 -let g:netrw_dirhistcnt =1 +let g:netrw_dirhistcnt =2 +let g:netrw_dirhist_2='/home/coolneng' let g:netrw_dirhist_1='/root/.config/nvim' diff --git a/neovim/.config/nvim/init.vim b/neovim/.config/nvim/init.vim index d6167fc..6f47677 100644 --- a/neovim/.config/nvim/init.vim +++ b/neovim/.config/nvim/init.vim @@ -47,15 +47,18 @@ let &t_8f = "\[38;2;%lu;%lu;%lum" let &t_8b = "\[48;2;%lu;%lu;%lum" ""Disabe status line set laststatus=0 +""Set Markdown filetype for neomutt +autocmd BufNewFile,BufRead /tmp/neomutt* set filetype=markdown ""Quitting whether Goyo is active or not -function! g:Goyo_before() +function! s:goyo_enter() let b:quitting = 0 let b:quitting_bang = 0 autocmd QuitPre let b:quitting = 1 cabbrev q! let b:quitting_bang = 1 q! endfunction -function! g:Goyo_after() +function! s:goyo_leave() + " Quit Vim if this is the only remaining buffer if b:quitting && len(filter(range(1, bufnr('$')), 'buflisted(v:val)')) == 1 if b:quitting_bang qa! @@ -65,4 +68,5 @@ function! g:Goyo_after() endif endfunction -let g:goyo_callbacks = [function('g:Goyo_before'), function('g:Goyo_after')] +autocmd! User GoyoEnter call goyo_enter() +autocmd! User GoyoLeave call goyo_leave() diff --git a/openbox/.config/openbox/autostart b/openbox/.config/openbox/autostart index 371410f..cc13517 100755 --- a/openbox/.config/openbox/autostart +++ b/openbox/.config/openbox/autostart @@ -16,12 +16,9 @@ set b off & ## Bluelight filter (sleep 4; redshift) & -## Bar with invisible tray +## Bar (sleep 3; polybar main) & -## Emacs daemon -#(sleep 6; emacs --daemon=instance1) & - ## Vim plugin update (sleep 5; vim +PlugUpgrade +PlugUpdate +qa) & diff --git a/openbox/.config/openbox/rc.xml b/openbox/.config/openbox/rc.xml index 6e20c69..71b9b55 100755 --- a/openbox/.config/openbox/rc.xml +++ b/openbox/.config/openbox/rc.xml @@ -315,7 +315,7 @@ - alacritty + kitty